Overview

The Model 8928 SCSI Chassis consists of a 
19-inch rack-mountable SCSI chassis
Subassembly, four SCSI device power supply 
subassemblies, or a mixture of SCSI device 
power supply subassemblies with and without 
SE/DA, filler plates to cover the three right-most 
device slots, SCSI bus internal cables, and a 
SCSI installation kit.

It is available in either 100 - 120 VAC or 200 - 240 VAC @ 50 - 60 Hz, The 100 - 120 VAC is for domestic CONCEPT/32 and Encore RSX systems only. The 200 - 210VAC is for international CONCEPT/32 and Encore RSX systems, as well as domestic and international Encore 91 Encore 93, and Infinity 90 Series systems. 

The following hardware prerequisites apply to this product:

• 7" (4U) of available vertical rack space in a system cabinet designed for peripherals or a peripheral cabinet. The following cabinets are acceptable:

- CONCEPT/32 System Cabinet
- CONCEPT/32 Peripheral Cabinet
- Encore RSX System Cabinet
- Encore 91 Series System Cabinet
- Encore 91 Series, Model 3990,Expansion Cabinet
- Encore 93 Series Peripheral Expansion Cabinet (PEC)
- Encore Infinity 90 Series Peripheral cabinet

• A SCSI Interface Cable and Terminator as defined by Model 7360-aa.

There are no software, firmware, or license prerequisites.

Limitations  -  A maximum of 7 devices per SCSI bus are allowed.

Documentation
A comprehensive set of documentation is supplied with the system documentation and is 
not a part of this model number.

Model Number  8928-abc
Removable SCSI chassis - holds up to four 5-1/4" form-factor SCSI devices.
Note, suffix numbers (abc) are determined by power, cabinetry, platforms, and bus configurations.

Electrical
AC (-0) 100 - 120 VAC @ 50 - 60 Hz
AC (-1) 200 - 240 VAC @ 50 - 60 Hz

Physical
Height 17.70 cm (6.97 in)
Width 48.13 cm (18.95 in)
Depth 67.94 cm (26.75 in)
Weight 6.5 kg (14.3 lbs) mm.  23.8 kg (52.6 lbs) max.

General Information: CompanyEmail
Sales:  sales@encore-support.com
Customer Support: supp@encore-support.com
Webmaster: CompanyWebmaster