The DAE-800 (Disk Array Enclosure) is designed specifically for RAID applications. It can be configured as a stand up tower or horizontal rackmountable unit. Each configuration provides a total of eight half-height 5.25"drive bays readily accessible from the front. The DAE-800 is configured with one-to-eight hot swap drive caddies.
The dual 300 watt power supply system of the DAE-800 is one of the highest quality fault-tolerant power supply systems available. (Optional, standard configuration single 300 watt power supply.) It offers true two way load-sharing and hot-swappable capability. If one of the power supplies should fail, the system produces an audible alarm and an LED signal, which would allow users to change failed power supplies without turning the power off. Three high capacity ball bearing fans keep the system operating in a cool environment. The back panel offers various cable connector options.
With all the features designed in by TMG, DAE-800 offers the most cost-effective RAID Ready Enclosure. Customer specified configurations and colors are available. Contact your sales representative for details.
Specifications:
| Dimensions: |
Horizontal position: 19" W x
24" D x 6" H Vertical position: 6" W x 24" L x 22" H |
| Weight: | 55 lbs |
| Cooling Fans: | Three 60mm high capacity ball bearing fans |
| Drive Bays: | Eight external accessible 5.25" half-height bays |
| Back Panel: | Six Centronic 50 type cut-out. One 9 pin DIN cut-out |
| Control Panel: | Power LED, On/Off switch for each power supply |
| Options: | SCSI-II Micro DB50 or SCSI-II Fast/Wide Micro DB68 connector |
| Distribution kit | Ext SCSI data cable, power cord, SCSI terminator |
Redundant, hot-swappable, load-sharing 300W power supplies producing a total of 600W. Each power supply has individual On/Off switch.
Short Circuit protection
Over load protection when voltage increases over 30%
Over voltage protection when DC output is over 6.3V
Noise & Ripple: less than 1%
Has built-in minimum load
True two way load-sharing providing 600W of power
DESKTOP CASES |
|
 |
1 x
3.5" Removable Device 30 Watt Cont. 5V 3.5A, 12V 1.5A 5V 5A, 12V 3A 240
x 76 x 313mm 9.45 x 3.0 x 12.32 inch 11cfm, 60mm fan Centronics connection
|
| 2 x 3.5" Removable Devices 65 Watt Cont. 5V 3.5A, 12V 4A 5V 5A, 12V 11A 240 x 120 x 313mm 9.45 x 4.72 x 12.32 inch 3.55Kg - 7.7lbs 42cfm, 80mm fan Centronics connection |
 |
|
|
 |
4 x 3.5" Removable Devices 2 x 65 Watt Cont. 5V 3.5A, 12V 4A 5V 5A, 12V 11A 160 x 230 x 365mm 6.30 x 9.05 x 14.02 inch 6.55Kg - 14.5lbs 42cfm, 80mm fan 4.2cfm, 40mm fan Centronics connection |
| |
|||
| Hot removability |
|
SCSI-II
Fast/Wide. |
|
|
|||
 |
Carrying Case Optional lead lined carrying case protects against shock and stray magnetic fields. Size 7.5"L x 10.0"W x 3.0"H |
||
