|
Overview
The Model 8928 SCSI Chassis consists of
a 19-inch rack-mountable SCSI
chassis
Subassembly, four SCSI device power
supply subassemblies, or a
mixture of
SCSI device power supply subassemblies
with and without SE/DA, filler plates to
cover the three right-most device slots,
SCSI
bus internal cables, and a SCSI
installation kit.
It is available in either 100 - 120 VAC or 200 - 240 VAC @ 50 - 60
Hz, The 100 - 120 VAC is for domestic CONCEPT/32 and Encore RSX systems only. The 200 -
210VAC is for international CONCEPT/32 and Encore RSX systems, as well
as domestic and international Encore 91 Encore 93, and Infinity 90 Series
systems.
The following hardware prerequisites apply to this product:
- 7" (4U) of available vertical rack space in a system cabinet
designed for peripherals or a peripheral cabinet. The following
cabinets are acceptable:
- CONCEPT/32 System Cabinet
- CONCEPT/32 Peripheral Cabinet
- Encore RSX System Cabinet
- Encore 91 Series System Cabinet
- Encore 91 Series, Model 3990,Expansion Cabinet
- Encore 93 Series Peripheral
Expansion Cabinet (PEC)
- Encore Infinity 90 Series Peripheral cabinet
- A SCSI Interface Cable and Terminator as defined by Model 7360-aa.
There are no software, firmware, or license prerequisites.
Limitations - A maximum of 7 devices per SCSI bus are allowed.
Documentation
A comprehensive set of documentation is supplied with the system
documentation and is
not a part of this model number.
Model Number
8928-abc
Removable SCSI chassis - holds up to four 5-1/4" form-factor
SCSI devices.
Note, suffix numbers (abc) are determined by power, cabinetry,
platforms, and bus configurations.
Electrical
AC (-0) 100 - 120 VAC @ 50 - 60 Hz
AC (-1) 200 - 240 VAC @ 50 - 60 Hz
Physical
Height 17.70 cm (6.97 in)
Width 48.13 cm (18.95 in)
Depth 67.94 cm (26.75 in)
Weight 6.5 kg (14.3 lbs) mm. 23.8 kg (52.6 lbs) max.
|
